The latest 2024.20.1 update on my tesla disables the additional CarPlay-type screen.

E

eisenbri

New member
Jun 21, 2024
4
0
1
SouhaiL said:
You absolutely must contact the seller to get the right fix, otherwise it will block your device.
Click to expand...
I have exactly the same Catronics device as you in my 2023 Model Y. AMD chip, 9 inch display. I am happy to try whatever file they sent you. Alternatively, please share how you contacted them to get such a fast response. Thanks!
 
T

traxxmaxx

New member
Jun 21, 2024
4
1
3
mircea87 said:
Hello, the fix didn't work for me. After the update, the screen shows a partial and also inverted image...
Click to expand...
Hi

I have the same problem after update the screen :(

Have you a fix ? I try to contact the seller but no respond at this time :(
 

Attachments

  • Capture d’écran 2024-06-21 144102.png
    Capture d’écran 2024-06-21 144102.png
    611.3 KB · Views: 12
Last edited:
S

SouhaiL

New member
Jun 11, 2024
27
5
3
Try this file. If you have an upside down screen you try the second file that I will send you. There is also a video showing the installation method.
 
E

eisenbri

New member
Jun 21, 2024
4
0
1
SouhaiL said:

WeTransfer | Send Large Files Fast - Up To 2GB Free

The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.
wetransfer.com wetransfer.com
Click to expand...
Tried this but when I plug in my USBC device with the file, the system upgrade check box never comes up on the screen. Can the files be in the root of the drive or do they need to be in a folder?
 
Last edited:
E

eisenbri

New member
Jun 21, 2024
4
0
1
0b1kb said:
Hi all, the fix will depend on the exact type of display you have. Based on the picture you posted, it looks like you have the same one I have. I contacted Hansshow and they sent me a file which is an older firmware and told me to install it, and then use the OTA (you need WiFi) to update to the latest firmware. The solution worked.

Please note that I didn't even use the file they sent me, I have a collection of firmware updates I have done for my display so I just used a firmware version that I had that was very close to the one they sent me (they sent me MCU V0.3.18 but the update I used that I had with me was the 3.19 instead). Then I did the OTA update and everything works correctly again.

The reason to go backwards on the firmware is to be able to see the display again (the Tesla update made the display impossible to see anything or very bad image and cannot interact with it). Once you are downgraded, the display works again, but it has issues with the battery and range showing very wrong numbers (I had 75% battery but the display said 205% and best one, over 10 thousand miles range!! I wish!!!). So, once you can work on the display, you can connect it to your WiFi (I use my phone hot spot) and then do an OTA update. Make sure to select the ORIGINAL theme first. Once done, everything should work, and if you wish to change themes, then do so using OTA.

But again, better contact them as your hardware might be a bit different than mine even if they look the same.

Good luck!
Click to expand...
can you share the downgrade file?
 
E

eisenbri

New member
Jun 21, 2024
4
0
1
SouhaiL said:
Files must be in the root
Click to expand...
Thats where I have them but when I plug my USB C drive in, nothing happens. Screen remains black. I have the .img file and the 2 bin files in the root. The drive is formatted as FAT32. Plug it in, nothing happens.
 
Last edited:
S

SouhaiL

New member
Jun 11, 2024
27
5
3
Both files are for 9 and 10" screens running under Linux OS.
 

Attachments

  • IMG_7736.jpeg
    IMG_7736.jpeg
    839.8 KB · Views: 10
M

MYLRNYC

New member
Jun 27, 2024
1
0
1
Same here, can you please re-share the files? I've been trying to find a solution for a similar issue.
The screen "turns on" but it just boot loop.
 
S

SouhaiL

New member
Jun 11, 2024
27
5
3
Hello it's very simple you install the unzipped file on a usb c key, You install the patch first, if it works, you install the latest update by wi-fi OTA. After installing the patch, If you have an upside-down display it's not the right file, I have a second file in this case reinstall.

WeTransfer | Send Large Files Fast - Up To 2GB Free

The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.
we.tl we.tl
 
  • Like
Reactions: kang4600
A

Anndybo

New member
Jun 29, 2024
1
0
1
SouhaiL said:
Hello it's very simple you install the unzipped file on a usb c key, You install the patch first, if it works, you install the latest update by wi-fi OTA. After installing the patch, If you have an upside-down display it's not the right file, I have a second file in this case reinstall.

WeTransfer | Send Large Files Fast - Up To 2GB Free

The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.
we.tl we.tl
Click to expand...
Hi, just installed the 89 file but have half screen. Can you send the other file? 10.26? needed? Thank you! My wife really need carplay :)
 
You must log in or register to reply here.
Top Bottom