Tesla Sentry Mode: What It Is, How to Use It and Battery Drain

Tesla's Sentry Mode captures videos from up to four cameras at once

Not a Tesla App

Tesla Sentry Mode is an intelligent vehicle security system designed to monitor and record potential threats around your parked Tesla. This feature utilizes the vehicle's cameras and sensors to detect suspicious activity, notify the owner through the Tesla mobile app, and save footage to a USB drive.

What is Sentry Mode

When enabled, Tesla Sentry Mode keeps the vehicle's cameras and computer powered on and ready to record potential threats while the car is locked and in Park. If a threat is detected, the system pulses the headlights, displays a message on the touchscreen, and may sound the alarm, depending on the situation. In addition, footage of the event is saved to a USB drive, and the owner will be notified via the app if the alarm goes off. Sentry Mode offers an extra layer of security for Tesla owners, helping to deter would-be thieves or vandals.

Cameras and Sound

While Sentry Mode is enabled, it will record from four of the vehicle's nine available cameras. The video recorded comes from one of the front-facing cameras, the fender camera on either side of the vehicle, and the rear camera. The other remaining front-facing cameras, B-pillar cameras, and the cabin camera do not record at this time.

Teslas do not contain any external microphones, so all Sentry Mode videos are silent. Although Teslas do contain internal microphones, Tesla does not capture audio from these microphones. In fact, even if you're viewing the interior camera in the Tesla app, you can not hear any audio from inside of the vehicle.

How to Turn On Sentry Mode

You can enable Sentry Mode by tapping Controls then tapping 'Sentry.' The Sentry Mode icon will turn red when Sentry Mode is enabled. You can also choose to turn on Sentry Mode automatically when the vehicle is parked or activate it using the Tesla mobile app. Voice commands like "Keep Tesla safe," "Keep my car safe," "Sentry on," or "Enable Sentry" can also be used to enable the feature.

Enable Sentry Mode from the Controls menu

Not a Tesla App

How Long Does Sentry Mode Stay On

Once Sentry Mode is enabled, it will remain on until you turn it off, or when your battery reaches 20%. If the battery falls below this level, Sentry Mode will turn off, and you will receive a notification via the Tesla app. Since Sentry Mode increases power consumption, Tesla turns it off automatically to leave you with enough energy to reach your destination.

Sentry Mode Battery Drain

Since your vehicle's computer needs to remain on to process video from its various cameras, there is additional power usage while Sentry Mode is enabled.

The actual amount of power consumed varies based on your vehicle's specific hardware, but tests have shown that the vehicle will consume about 250 to 300 watts while Sentry Mode is on. This is equivalent to losing about 1 mile of range for every hour Sentry Mode is enabled.

In a day, Sentry Mode may consume as much as 7.2 kWh, about 24 miles of range, or roughly equivalent to 7% to 14% of your battery, depending on your model and battery size.

Since Sentry Mode consumes so much energy, it's best to use it only when needed. Sentry Mode is not meant for when your vehicle will be parked long term, as it'll quickly drain your battery. Luckily, Tesla offers options to automatically enable Sentry Mode at specific locations and Sentry Mode is automatically disabled when the vehicle's battery falls to 20%.

Sentry Mode Options

You can customize Sentry Mode settings to fit your preferences and requirements. Some options available include:

Disabling sounds: If you want to silence the security alarm and audio system when the alarm is triggered, navigate to Controls > Safety > Disable Sentry Sounds. Sentry Mode will still send a notification through the mobile app and save the last 10 minutes of footage of any events that occurred.

Excluding specific locations: In Controls > Safety > Sentry Mode, you can choose not to enable Sentry Mode in particular areas, such as your home, work, or favorite destinations. This can be helpful if you want to conserve battery power or avoid unnecessary recordings in familiar areas.

Choosing the clip length: In some markets (Not available in the U.S. and Canada), you can select the length of Sentry Mode video clips, allowing you to customize how much footage is saved during an event. 

Disabling camera detection: If you prefer, you can disable camera detection so that Sentry Mode only activates when the car senses a physical intrusion. This can be helpful in situations where you want to minimize the number of false alarms or unnecessary recordings.

How to Set Up Sentry Mode

First, insert a compatible USB drive into the glove box USB port. If your car doesn't have a USB port in the glove box, you can use one in the center console. Note that not all Teslas have data-capable USB ports in the center console, so the glove box should be your first choice. Chances are that Tesla already included a compatible USB drive in the car for you. Tesla defines a compatible USB drive as one that is USB 2.0 compatible and holds at least 64 GB. This Samsung USB drive is a good choice for Sentry Mode because of its durability and size. It offers fast write speeds and 256GB of storage, 4x Tesla's recommendation.

Next, you can format the USB drive by going to Controls > Safety and tap on "Format USB Drive." Tesla recommends using a high-quality USB drive to ensure smooth recording and playback of Sentry Mode videos. You can also enable Dashcam recording. Navigate to Controls > Safety > Dashcam in your vehicle's menu and set it to Auto. This will allow your vehicle to automatically record footage while driving. Footage will automatically be recorded when an event is detected or when you tap the Dashcam icon under Controls > Dashcam.

How to View Sentry Mode Recordings

You can review your Sentry Mode video with the Dashcam Viewer app in the car

Not a Tesla App

To view Sentry Mode or Dashcam videos, use the Dashcam app in your vehicle. The Tesla system tags events with a red dot, making locating and reviewing footage easier. This feature allows you to quickly identify any incidents around your vehicle and gather evidence if necessary. Remember to regularly check your USB drive's storage capacity, as new recordings will overwrite the oldest ones when the drive is full. It's a good idea to back up important footage to a separate storage device for safekeeping.

Sentry Mode Live Access

You can view live footage from your vehicle in the Tesla app

Not a Tesla App

Sentry Mode Live Access lets you view your vehicle's cameras in real-time using the Tesla mobile app. This feature requires Tesla's Premium Connectivity. When using View Live Camera, your vehicle will periodically flash its exterior lights and displays a message on the touchscreen, notifying others that the area surrounding the vehicle is being viewed through the cameras.

To enable the View Live Camera feature, touch Controls > Safety > Sentry Mode > View Live Camera via Mobile App on the car's touchscreen. First, ensure no occupants are in the vehicle, and all doors are locked. Then, navigate to Safety > Sentry Mode > View Live Camera in the Tesla app. The live camera feed is fully encrypted and cannot be accessed by Tesla, ensuring your privacy. View Live Camera is limited to approximately one hour (or 15 minutes for some regions) of cumulative usage per day. Although Sentry Mode Live Access is widely available, it is not currently available in all markets.

If your vehicle is equipped with a pedestrian warning speaker you can press and hold the microphone button in the app to transmit your voice through the speaker, potentially deterring would-be intruders or vandals.

When Dog Mode or Sentry Mode are enabled, you can also switch the live camera view to see through the vehicle's interior camera. This can be useful if you want to check on your pet while away from the vehicle. Note that this feature is not supported in vehicles with Autopilot computer 2.0 or 2.5.

Tesla Sentry Mode is a valuable security feature that can help protect your vehicle from potential threats. By following the steps provided, you can set up, enable, and customize this feature to fit your needs. As a Tesla owner, using Sentry Mode can give you peace of mind, knowing that your car is actively monitoring its surroundings for potential threats. While no security system can prevent all attacks, Sentry Mode offers an added layer of protection that can help deter criminals and keep your vehicle safe.

Tesla Holiday Update Wishlist - Maps & Autopilot Edition

Not a Tesla App

We’re eagerly anticipating Tesla’s biggest update of the year — the Holiday update. The update usually arrives in December, typically towards the end of the month. Last year, the rollout was actually earlier, happening in the second week of December.

As part of our ongoing series, we’re sharing our wishlist for features we hope to see in this year’s holiday update. This edition focuses on improvements to Tesla Maps and Autopilot.

User-contributed Map Data

Many users have asked for the integration of more Waze-like features into Tesla’s navigation. Earlier this year, Tesla added Speed Camera locations, traffic lights and stop signs to maps, but users really want it to be a Waze-like experience that lets you contribute data. This includes marking police car locations, accidents, construction, and more. We’re not sure how likely this is to happen. So far, Tesla has relied on the Google API and other vendors to highlight information on the map.

Avoid Highways Option

Users have been asking for an ‘Avoid Highways’ option forever, as it’s a standard option in navigation systems nowadays. While the Alternate Routes feature is helpful, it may not always provide a route that avoids the highway.

In June, Elon Musk confirmed that a “Avoid Highways” option would be added to Tesla navigation. We still haven’t seen it arrive, but we’re fairly confident that it will eventually be available in Tesla vehicles, maybe even for the Holiday update. What better way to enjoy a winter wonderland than to drive through some country roads instead of on the highway?

3D Buildings in Maps

Not a Tesla App

3D maps arrived in China earlier this year, and Google began rolling out 3D maps for various apps just last month. Apple already provides a 3D map with beautiful renderings of nearby buildings, and Rivian already features 3D buildings with an Apple-like look, so Tesla is playing catch-up a little bit here.

While 3D map support could be viewed as mostly eye candy, it can sometimes be useful when navigating an unknown area. Since the Intel infotainment processor is already near its limit and has excluded features in the past, such as improved visualizations and High Fidelity Park Assist, this feature could be limited to newer AMD-powered vehicles.

At Tesla’s recent Robotaxi event, we saw custom 3D maps in the vehicle with a specialized interface, so Tesla knows this is an appealing addition.

Full Screen Visualizations on Intel

BLKMDL3

This year Tesla added support for full screen Autopilot visualizations on AMD-based vehicles. Unfortunately the option to go full screen isn’t available on Intel vehicles, unless you’re in North America and have FSD.

There isn’t a clear reason why this is the case, since Intel vehicles can obviously handle them. It’d be nice if this holiday season Tesla expanded  full-screen visualizations to all Intel vehicles, regardless of location.

Detect and Visualize Emergency Vehicles

Greentheonly/X

Tesla already detects emergency vehicles while on Autopilot, however, it doesn’t display them in the visualization any differently than a normal car. Tesla was planning on adding emergency vehicle visualizations as far back as 2021, but they didn’t happen for some reason.

Tesla recently announced that they’re going to step up emergency vehicle detection by not only detecting the vehicles visually but also using audio input as a cue. With FSD v13, which is expected to be released to Tesla employees this month, FSD will detect emergency vehicles using the vehicle’s internal microphone. This should let the vehicle know about emergency vehicles sooner. We’re hoping that on-screen visualization comes along with this update.

If it’s anything like Tesla’s 2021 implementation, Tesla will design emergency lights that could be added to various existing 3D models, such as cars, SUVs, and motorcycles.

FSD Visualizations in Other Regions

This one is long overdue, and we hope it finally arrives. Owners outside of North America have been paying for FSD for years and have almost nothing to show for it. Sure, it includes some features like Summon (with USS vehicles) and, more recently, Autopark, but it doesn’t even include Actually Smart Summon yet.

While Tesla says the FSD is coming to Europe and China in Q1/Q2 next year, it’d be a great addition to add FSD visualizations for the time being.

There’s no doubt that Tesla is already detecting objects and vehicles behind the scenes and comparing what the vehicle would do to what the driver does to help improve Autopilot in these markets. For some reason, Tesla has decided to show different visualizations depending on whether you have Autopilot or FSD and whether you live in North America or elsewhere.

Adding FSD visualizations for everyone, regardless of whether they have Basic Autopilot, EAP, or FSD, would be an exciting addition — and it may even increase the subscription rate to FSD.

Expand Basic Autopilot

Tesla’s Basic Autopilot includes Adaptive Cruise Control and Autosteer, but we’d love for Tesla to expand this further to match what other manufacturers are offering.

Right now, Tesla considers Navigate on Autopilot and automatic lane changes part of Enhanced Autopilot. This means that if you’re on Autopilot and want to change lanes, you need to disable AP, change lanes, and re-enable it. Since many regions no longer offer Enhanced Autopilot for purchase, users are forced to put up with this annoyance or pay for FSD, which isn’t offered as a subscription outside of North America.

By creating a clearer distinction between Autopilot (focused on highway driving) and FSD (designed for city driving), Tesla could improve the Autopilot experience for users while encouraging them to upgrade to FSD.

Actually Smart Summon

Actually Smart Summon is still mostly limited to North America, with some small regions such as Taiwan, also receiving it. However, it still requires you to hold the ‘come’ button currently. The next big leap would be to remove this requirement and enable users to summon their vehicles with a single tap. Tesla previously said this was coming in a future improvement to A.S.S.

Ideally, we’d see the reach of Actually Smart Summon expanded to Europe and other regions and improvements of the feature, although we’re much more likely to see the former for the Christmas update.

Cybertruck is also still waiting for Summon, so this could be an additional surprise.

Autoshift for All Cars

While Autoshift isn’t directly tied to Autopilot, it does leverage AI to decide whether to shift into reverse or drive. This feature has now been released on the new Model S, Model X, the new Model 3, and the Cybertruck. However, Musk once said that it would be added to all Tesla vehicles, so we’re hoping that’s still in the works.

There’s certainly no reason why Tesla can’t add it to older vehicles with stalks. For those not familiar with Autoshift, it allows the vehicle to automatically shift into reverse or drive when the driver is ready to start moving. This makes it even easier to get going: You simply get in the car, press the brake pedal, giving the vehicle a chance to shift, and then press the accelerator.

This is our second wishlist of features we’d love to see in Tesla vehicles this holiday season. If you haven’t seen our first wishlist, the Tesla App Edition, be sure to check it out.

While this is a list of the most popular user requests related to Tesla’s navigation and Autopilot features, we’re sure that there are some we missed. Let us know your thoughts and ideas in our forums.

Follow

Follow

Follow

Tesla Cybertruck November Update: No More Wraps, New Crossbars Accessory, Available in Inventory, and Faster Charging

Not a Tesla App

There’s been a spade of Cybertruck announcements that just came up all at once, so let’s see what the polygonal truck is up to in the month of November. We’ve got a variety of topics to cover, starting with some disappointing news about Tesla’s in-house wrapping services, which are being discontinued for the Cybertruck. But don’t worry — there’s plenty of good news to follow.

No More Tesla Wraps

Tesla no longer offers wraps for the Cybertruck as an option for US customers. Tesla began wrapping vehicles earlier this year but stopped offering wraps for the Cybertruck as of November 13th.

This comes after Tesla previously reduced the color options for Cybertruck wraps from seven to five. However, this isn’t too big of an issue—there are plenty of companies that specialize in vehicle wraps.

The reason Tesla stopped offering wrap services for the Cybertruck isn’t clear. Was there not enough demand? Did it take up too much time from technicians who are already stretched thin?

Given the long repair backlogs in the United States, it makes more sense to have service technicians focus on vehicle repairs rather than spending time wrapping cars.

Inventory Foundation Series

The Cybertruck Foundation Series is now available as an inventory vehicle in certain locations in the United States. That means you can pick up a Foundation-series truck with little to no delay.

Only a few trucks are currently in stock, but this will likely expand as Tesla continues to ramp production and begins to offer the non-Foundation Series trucks as inventory vehicles.

These inventory vehicles are only available in the United States. Canadian owners will still need to put down a deposit for a Foundation Series Cybertruck to get it soon.

Crossbars

Tesla has just announced it is offering a new set of crossbars for the Cybertruck. With a load rating of 200 lbs, it’s on par with roof racks for other trucks. These crossbars also come with mounting pads and quick releases. There are also slots for attaching ski racks, bike racks, or even cargo boxes, letting owners expand the truck's storage capacity.

Interestingly, the Foundation Series trucks can install the crossbars over the cabin or the truck bed, while the non-Foundation Series can only mount the crossbars over the truck bed. That isn’t the greatest news - because one of the best uses for these crossbars is protecting the cabin glass when you’ve got items like long wooden planks hanging over the roof of the truck. Maybe we’ll see more on this soon.

The mounting points for the Cybertruck's crossbars.

Not a Tesla App

Update: It turns out that you can, in fact, install the crossbars anywhere on a non-Foundation series vehicle. You’ll just have to pay for an additional roof applique, according to Wes Morril, Lead Engineer of the Cybertruck Program.

Faster Charging

Tesla announced updated versions of the V4 Supercharger, with a more powerful electrical cabinet that can charge the Cybertruck at up to 500kW. That’s an insanely fast speed—nearly 1,300 mi/hr of charging. This will come as part of a future update for the Cybertruck and as V4 Supercharger stations begin to be deployed.

That’ll make the Cybertruck the fastest-charging Tesla - even with its enormous battery.

Follow

Follow

Follow