Tesla adds CCS combo 1 adapter to its U.S. store

By Kevin Armstrong
Tesla has added the CCS 1 adapter to its U.S. store
Tesla has added the CCS 1 adapter to its U.S. store

Tesla owners can say goodbye to range anxiety. Despite Tesla's vast network of more than 35,000 Supercharger stations, there are still areas that can raise the stress level as the charge goes down.

Those days will soon be a distant memory as more non-Tesla charging stations pop up. However, those stations do not have the sleek Tesla charger but a big, bulky one called CCS.

CCS, which stands for Combine Charging System comes in two types. Type 1 is mainly used in North America and South Korea, while CCS type 2 is the charging standard in Europe. They differ in the number of phases and maximum power they can provide.

Up until now, Tesla did not sell its CCS type 1 adapter in North America, but they did in South Korea. If you wanted one, you needed to import it or purchase the adapter through a third party. These adapters have been selling for a hefty price online, including eBay. Some sellers have the adapter listed for as much as $1000.

However, Tesla has finally added the adapter to its U.S. store. Tesla owners will now be able to tap into a whole other charging network.

Tesla introduced the device in the store at the bargain basement price of $250 USD, a significantly better deal.

But, not all Teslas are CCS compatible. Some models can charge with CCS once the adaptor is attached. However, several models, especially versions before 2020, are not CCS ready. There is a simple way to determine if your Tesla is suitable for CCS by taping the main menu, then Software and then Additional Vehicle Information. A box will pop up with a lot of information; scan for CCS adaptor support. It will show 'Not Installed' or 'CCS Enabled'.

Electronic Control Units (ECU) were available in the Tesla parts catalog for owners to retrofit their cars if they were incompatible. However, after the launch of the adapter in the Tesla store, visitors are asked to sign in before before being able to purchase the adapter.

The website determined if the owner had a CCS-ready Tesla. If you didn't then you were presented with this message: “This accessory requires a retrofit. Check back in early 2023 for availability.” Further down the page, there are instructions to check back in early 2023 for the availability of vehicles requiring a retrofit.

Tesla has also added messaging within its mobile app. If you navigate to the Service section, you'll now see a message at the top of the app displaying 'CCS Adapter Retrofit, check vehicle status.'

Unfortunately tapping on it doesn't offer any additional information, asking owners to check back in early 2023 to schedule an appointment for a retrofit.

CCS stations reportedly reach speeds of more than 150kW in the U.S., and, unfortunately, they are the preferred plug of several manufacturers. There was a petition to have the Tesla charging hardware be the industry standard, but it appears that has failed. CCS is available at Electrify America and Electrify Canada, and several other third-party power suppliers.

Tesla Updates FSD From V12.3.6 to V12.5 on Update 2024.44

By Karan Singh
Not a Tesla App

Tesla maintains two primary software branches: the main feature branch and the FSD branch. In general, the FSD branch lags behind on new features pushed to the main branch but provides a more recent FSD version.

However, now Tesla is updating the main branch to a much more recent version of FSD.

Current FSD Build & Shadow Mode

Nowadays, the main branch always includes an older but stable build of FSD. It’s been on FSD V12.3.6 since July 2024. So, if you subscribe to FSD in North America, this is the FSD version you’ll receive until you get added to the FSD track.

Even if you don’t subscribe to or have purchased FSD, your vehicle has v12.3.6 on it. That includes vehicles in regions where FSD isn’t available for general use, such as Europe and China. In those cases, FSD runs in Shadow Mode, providing training data to Tesla if you’ve agreed to their data privacy policies. So Tesla is always analyzing what the vehicle would do compared to what the driver does. When there are contradictions, these are the clips and data Tesla will want to analyze.

FSD V12.5.4.2 on Main Branch

For the first time in five months, Tesla has now updated the baseline version of FSD in the main branch. The new version included with 2024.44 updates is FSD v12.5.4.2. This Tesla is updating the baseline FSD version to FSD V12.5.4.2

FSD 12.5 includes many features for a much smoother experience compared to FSD 12.3.6. Many users will appreciate that it gets rid of the steering wheel nag and instead relies on the cabin camera to provide real-time driver monitoring. This version also includes support for sunglasses with driver monitoring. It’ll be a big upgrade for anyone coming from FSD 12.3.6.

It's always a good thing when Tesla updates the baseline FSD version—that means that Tesla is confident that this new baseline is considerably safer and will continue to train the fleet against it.

What Update Am I Getting?

If you’re already on FSD V12.5.4.2, you’ll likely remain on that FSD build unless V13.3 manages to make its way to the public as Tesla originally planned, but that’s unlikely to happen before the Thanksgiving holiday. In all likelihood, you’ll be getting update 2024.44, which will give you some additional Tesla features while keeping you on the same FSD version.

For those who are already on 2024.44 - if you subscribe now, you’ll have V12.5.4.2 enabled on your vehicle.

If you have a Cybertruck, then you’ll receive update 2024.39.5 with FSD V12.5.5.3. They’re on a unique build for the moment, and this will likely be the case until Tesla acquires enough training data from the Cybertruck fleet.

What About FSD V12.5.6? V13?

FSD V12.5.6 is currently the build being provided to early access testers who have AI4 vehicles. It has new features like Driver Profiles, better lane change decisions, improved Max Speed Offset, and a few others. Tesla last pushed an update to FSD 12.5.6.2 in early November with some improvements to Driver Profiles.

That build is likely going to be deprecated as Tesla gets closer to releasing FSD v13, which they showed off at the We, Robot event back in October. The AI4 Model Ys and Cybercabs at We, Robot were running an early V13 build/ 

The updated FSD roadmap provided at the end of October mentioned that V13.3 will be the build that will make its way to customers sometime around Thanksgiving, but so far, no employee vehicles have been spotted with FSD v13.

Tesla Cybertruck: Puddle Lights, FSD/Powershare, Mars? [Update: FSD Now Available in Canada]

By Karan Singh
Not a Tesla App

The Cybertruck is having an eventful November. Just last week, we shared the news that Tesla isn’t offering their in-house wrap service for the Cybertruck anymore; the Foundation Series is now available in inventory in select US locations, Crossbars have arrived, and faster charging is around the corner. Now there’s even more to discuss about the stainless steel beast.

Projection Puddle Lights

Like the recently launched puddle lights for the Model 3 and Model Y, Tesla has introduced a set of add-on Projector Puddle Lights for the Cybertruck. These Cybertruck-specific ones go for $75 USD, or $105 CAD and are available in both the Canadian and US Tesla stores.

However, these don’t have the Tesla wordmark - instead, they feature the iconic Cybertruck symbol and, in our opinion, look even nicer. Here’s to hoping Tesla also introduces a set with the graffiti-style Cybertruck wordmark.

Powershare in Canada

While the Foundation Series Cybertruck has been getting delivered in Canada since November 7th, there was no news on Powershare being supported due to regulatory constraints. On the 20th, Foundation Series owners in Canada began to receive emails to get their Powershare installs started through Tesla’s official installer - Qmerit.

More to follow on pricing and the process as we receive our Canadian quote from Qmerit soon.

FSD in Canada

The Cybertruck Program Manager, Siddhant Awasthi, confirmed that with Powershare now becoming available, FSD for the Cybertruck in Canada will also become available soon. Canadian trucks shipped with a factory software build that didn’t include FSD, but did include TACC and stoplight/traffic control.

Early this morning Tesla began rolling out a new version of FSD 12.5.5.3 for the Cybertruck, which is update 2024.39.5. Will this be the version that rolls out in Canada?

Update: Yesterday, Tesla started rolling out FSD on the Cybertruck in Canada for the first time. The update being rolled out is update 2024.39.5, which not only features the latest FSD available on the Cybertruck, version 12.5.5.3, but it also includes all the features update 2024.38, which includes the huge Sentry Mode improvements that reduce power consumption by about 40%.

Update 2024.39.5

FSD Supervised 12.5.5.3
Installed on 0.3% of fleet
1 Install today
Last updated: Nov 25, 8:05 am UTC

First Mars Payload

Following Integrated Flight Test 6 for SpaceX’s Starship, Elon Musk confirmed that uncrewed Starships are likely to begin making their way to Mars in about 2 years. You’re probably going to ask what’s going to be in those Starships - that’s what Brett Winston on X asked as well. Elon confirmed that Cybertrucks and Optimus robots will be among some of the first items landing on Mars.

That’s a ton of awesome news for Cybertruck, and there’s absolutely going to be more around the corner, especially as we await the big Tesla Holiday Update. While you wait, why not take a look at our Holiday Update Wishlists?

Latest Tesla Update

Confirmed by Elon

Take a look at features that Elon Musk has said will be coming soon.

More Tesla News

Tesla Videos

Latest Tesla Update

Confirmed by Elon

Take a look at features that Elon Musk has said will be coming soon.

Subscribe

Subscribe to our weekly newsletter