Yesterday, Tesla officially released FSD Beta in Canada with the 2022.4.5.20 software update. This update brings the FSD Beta to version 10.11.1.
This makes Canada the first country outside of the US in the FSD Beta Program. Canadian Tesla owners who have requested the Beta Program and scored 100 or 99 points are eligible for FSD Beta. The feature was released a month after Tesla first released the Safety Score.
Initially, the feature was only going to those with a perfect 100 score. It was later confirmed by Twitter user @Harvey_Sp that the feature was available to owners with a 99 Safety Score as well.
— Franks&Beans FSDBetaCanada (@WhatsupFranks) March 27, 2022
Launching the FSD Beta Program in Canada is a huge step toward full autonomy. With the introduction of FSD Beta in Canada, Tesla is further expanding the fleet of cars that improve the FSD software.
At an employee QA session in Berlin, Elon told Tesla employees that we may see the FSD Beta software introduced in Europe later this year. A lot of Tesla's future expansions may depend on how well and efficiently Tesla rolls out FSD in Canada.
Expanding the FSD Beta program globally has been challenging due to differences in road rules, signs, and road markings. With safety as the fundamental priority of autonomous driving, Tesla could not launch FSD Beta in Canada before it was sure of its capabilities.
In last year’s holiday update, Tesla introduced the much-needed Dashcam Viewer in the Tesla app. The feature allows owners to view Dashcam and Sentry Mode footage directly from the Tesla app, eliminating the need to review videos in your vehicle. Unfortunately, the feature was limited to iPhone users, but Tesla is now changing that.
With Tesla app update 4.43.5, Tesla is officially launching the Dashcam Viewer on Android devices.
Dashcam Viewer
The Dashcam Viewer makes it easy to access and manage your car’s Dashcam and Sentry Mode videos. Accessing videos on your phone is faster and more convenient, but it does come with a few requirements.
The Dashcam Viewer in the Tesla app allows you to view, delete, or save video clips right from your device. This should result in higher quality content being shared online and fewer videos of owners recording their Tesla’s screens with their phones.
How It Works
Dashcam footage remains stored locally on your vehicle’s connected USB drive, so Tesla isn’t streaming videos to your phone from the cloud. Instead, the videos are streamed directly from your vehicle to your phone—similar to how Actually Smart Summon delivers a live feed to your phone.
Because of this, your vehicle must be connected to cellular data or Wi-Fi for the Dashcam Viewer to work. Unfortunately, this may limit access for owners who park in underground or large parking garages where connectivity is poor.
How to Access the Dashcam Viewer
To view Dashcam and Sentry Mode footage in the Tesla app:
Navigate to Security & Drivers > Dashcam Viewer.
Wait a few moments for your phone to connect to the vehicle.
From there, you’ll be able to view, save, or delete clips right from your device.
Requirements
To use Tesla’s Dashcam Viewer, you’ll need a vehicle with MCU 2 (Intel) or higher. All models are supported except for the legacy Model S and Model X (2020 and older). However, we expect support to be added in the near future.
The legacy Model S and Model X are expected to receive support for Actually Smart Summon, which requires the ability for those vehicles to stream video to the Tesla app — the same capability the Dashcam Viewer needs. Once Actually Smart Summon is added to the legacy Model S/X, we expect those vehicles to also receive the Dashcam Viewer at the same time or shortly afterward.
Tesla has imposed some viewing limits to prevent high data usage. The viewing limits apply to streaming video from the Dashcam Viewer or viewing live video from the vehicle’s cameras. Tesla will limit video streaming from the vehicle to 15 minutes or 1 hour, depending on your region.
Android Support
Tesla typically releases support for newer features to iPhone users since they make up the majority of users. Recently, Tesla has added more features to Android. In January, Tesla added support for ultra-wideband to Android, which added support for the improved phone key and the hands-free trunk and frunk feature.
Did you know the Cybertruck’s air suspension automatically levels the truck, even while it’s asleep? This is a great feature, especially for camping or off-road adventures. However, it can be an issue when lifting a wheel to change a tire.
Fortunately, there’s a solution: Jack Mode.
Jack Mode
Jack Mode is made for jacking up the truck and prevents the Cybertruck from self-leveling.
To enable Jack Mode, you’ll first need to set the Ride Height to Medium from Controls > Dynamics > Ride Height. You can also set it from the Tesla app by navigating to the Controls section and sliding up until you see Ride Height. This will give you enough clearance for most jacks to get under the truck and lift it.
You can also activate Jack Mode in Low or High, but Tesla recommends a Medium ride height for best control of the vehicle and sufficient tire clearance to safely remove and reinstall the tire. However, once the vehicle is in Jack Mode, the Ride Height cannot be changed.
Next up, go to Controls > Service > Jack Mode to enable Jack Mode. The vehicle will warn you that Jack Mode is enabled and can either be disabled by pressing the button again or by putting the vehicle into drive.
For the duration that Jack Mode is active, it is safe to lift your Cybertruck, even on one side only. It will not self-level for the duration that Jack Mode is enabled.
Automatic Jack Mode
Jack Mode can also activate automatically to protect the suspension from potential damage. For example, if the vehicle’s bumper is resting on a curb, Jack Mode may engage on its own.
Once the obstacle is cleared, or if you shift into Drive or Reverse, Jack Mode will automatically be disabled.
