Tesla Improves Steer-by-Wire and Adds In-App Suspension Control in Cybertruck Update 2025.8.4

By Karan Singh
Not a Tesla App

Tesla proves once again that it listens to its customers, and this is a perfect example. Since the Cybertruck’s launch with an adjustable air suspension, owners have been requesting suspension-related features.

One major request is the ability to remotely adjust the vehicle’s height. This could previously only be done from inside the cabin via the touchscreen, but Tesla has now added it to the latest version of the Tesla app. However, using the feature also requires vehicle software 2025.8 or higher.

This software update also brings improvements to the Cybertruck’s steer-by-wire system, which is set to come to future Tesla models. Unlike traditional rack-and-pinion steering, steer-by-wire is not directly connected to the wheels like other vehicles, and “road feel” does not carry through to the steering wheel. Instead, Tesla implements software-driven wheel feedback, which is being improved in this update.

Remote Height Adjust

Now, as of Tesla software update 2025.8 and Tesla App V4.42.5, Cybertruck owners can remotely adjust the height of their Cybertruck through the Tesla app. This setting is in the Controls section of the app.

Here, you can adjust to the four pre-set road heights, including High, Medium, Low, and Entry. For now, you cannot adjust to the two Off-Road Mode heights, which are Very High and Extract.

Now, if you don’t own a Cybertruck, you’re probably wondering why so many are asking for this feature. Well, if you want to go off-roading or even want to load something into the bed of your truck, it’s convenient to be able to remotely adjust the height of the car without having to go in it first.

You can also use it to show off the Cybertruck’s massive vertical range of motion - which can go nearly eight inches from Entry to Extract - all without having to hop into the Cybertruck.

Model S and Model X?

This feature could also potentially make its way to the Model S and Model X sometime in the future since both of these vehicles also have an adjustable air suspension. Today, the heights of these vehicles can only be adjusted inside the vehicle.

We’re sure some Model S and Model X owners would love to be able to adjust the suspension remotely, even if they may not have the same use cases — it’s still a nice to have feature.

Steer-by-Wire Improvements

Tesla has improved the Steer-by-Wire feedback and response on the Cybertruck’s yoke. This new update should provide more realistic wheel feedback. The feedback will now adapt to different road surfaces for a better driving experience.

That means the response and feedback of the wheel will now be more precise - and also be varied by what kind of terrain you’re driving on.

More Features

One more thing we’d love to see from Tesla regarding the Cybertruck is the ability to drop just one side of the suspension. This is possible in Service Mode, where you can deflate either the front or rear air tanks, thereby inducing a slant to the vehicle.

This makes loading items even easier, as the bottom of the tailgate is now even closer to the ground. Tesla showed off the feature during the Cybertruck’s initial reveal. While the Cybertruck never arrived with its built-in ramp, we’d still love the ability to dip the truck for easier loading.

Another feature that was supposed to arrive for the Cybertruck was related to Steer-by-Wire. Today, the Cybertruck can steer up to 7 degrees, but the actual hard limit for the rear wheels is somewhere between 10 and 14 degrees. We’d love to see Tesla expand the rear wheel steering limits which will help reduce the Cybertruck’s already tight turning circle.

Tesla's Model 3 Performance Improves FSD Comfort by Changing Ride & Handling Setting

By Karan Singh
Not a Tesla App

Tesla continues to refine ride comfort, especially with FSD, where it aims to make every drive as smooth as possible. With the new Model 3 Performance, Tesla is introducing a new feature that allows for an even smoother ride while using FSD.

With the 2025.8 update, the vehicle will now automatically switch its suspension setting to Standard when FSD is enabled. This adjustment reduces road feel but improves ride comfort—a worthwhile trade-off while FSD is active.

The release notes state:

“Your vehicle will now automatically transition to Standard Ride & Handling when Autopilot is engaged for a more comfortable drive. This setting is enabled by default. To disable, tap Controls > Dynamics > Use Standard Ride & Handling in Autopilot.”

Dynamic Suspension

On the New Model 3 Performance, Tesla includes a dynamic, adaptive suspension system. While it isn’t an air-ride adjustable suspension like on the Model S, Model X, and the Cybertruck, it is an actively dampened suspension that improves the ride quality.

There are two settings for the dynamic suspension, which can be controlled from Controls > Dynamics > Ride & Handling.

Standard - Adjusts to a wide range of roads and driving styles, providing a fluid yet well controlled ride.

Sport - Provides a firmer, more controlled ride that increases driver engagement and connection to the road.

Many people prefer to drive on Sport as the road feel on the Model 3 Performance is fantastic, and even more so on a track.

FSD Will Use Standard Suspension

Tesla’s FSD aims to provide a comfortable trip from point A to point B, which means that connecting the driver with the road isn’t necessarily a goal here. Instead, as of software update 2025.8, FSD will now default to the Standard suspension setting instead of Sport. If you have Sport enabled, then FSD will switch to Standard when FSD is enabled and switch back to Sport when FSD is disengaged.

Many users will prefer using Standard when on FSD, but switching back and forth between suspension options isn’t feasible, so this is a great addition. However, if you prefer for the vehicle to remain in the Sport setting while FSD is enabled, you can turn off the “Use Standard Ride & Handling in Autopilot” in Controls > Dynamics.

Model S / Model X Setting

This feature for the new Model 3 Performance (2024+) is similar to the automatic ride height controls on the Model S and Model X. By default, these controls will automatically set the Suspension Damping option to Comfort when engaging Autopilot or FSD. Just like with this new setting for the Model 3, you can turn that off in Controls > Dynamics > Adaptive Suspension Damping in Autopilot.

We expect that when the new Model Y Performance is released in the coming months, it’ll also feature a similar setting.

The Best 3D Printed Tesla Accessories

By Karan Singh
Not a Tesla App

If you’ve got a 3D printer or know a friend who does, this article is for you. We’ve gathered some of the best 3D-printed Tesla accessories and toys for Tesla owners.

We’ll feature some utilitarian accessories for your Tesla and then cover some fun items later. The links provided are all to Prusa’s Printables website and are safe to visit and download.

As a note, mostly everything should be printed in either ASA, PETG, or ABS unless you’re planning to use them indoors. PLA won’t withstand the heat in your vehicle and will warp and break. There are some places you can use PLA without a worry, though, so we’ve gone ahead and made recommendations for each item.

Car Charging

Not a Tesla App

First on our list is a wall-mounted cable organizer that also fits the NACS adapter right in. We recommend using any filament for an indoor mount, but if you’re mounting outdoors and exposed to the sun, ASA or PETG are better choices. Be sure to choose a high infill percentage to keep the organizer sturdy.

Next up is for folks who need to regularly get their cable outside through their garage door. This garage door cable protector keeps the cable from getting squished when the garage door closes.

Not a Tesla App

There’s also this great holder for your J1772 adapter that lets it fit snugly in the door pocket. Tesla actually sells this product too, but you can just print your own instead.

Once again, use ASA or PETG due to sunlight and heat exposure.

Phone and Airpods Charging

Not a Tesla App

There are other accessories that could make charging your phone or wireless headphones easier. Most Teslas feature wireless phone chargers that fit most phones. However, if you’d like to charge your AirPods or a smaller phone, it may not work out so well. You can use these adapters to charge AirPods and Galaxy Buds.

There are even spacers for Tesla’s wireless charger to help position smaller phones in the correct spot. These may work okay in PLA if you don’t leave them exposed to the sun, but PETG is a better option.

Interior

Not a Tesla App

There are also plenty of functional utilities for the inside of your vehicle. The Model 3 and Model Y have large, open vents underneath the front seats to get conditioned air into the back. This vent cover adds a grate to the vents, preventing small things from falling side. It’s applicable for either the Model 3 (non-refresh) and the Model Y, also non-refresh. Any filament will do for this since it won’t be in direct sunlight.

If you need somewhere to hang some bags, here’s a bag hook for the Model Y. You’ll need a cargo shelf mount for this to attach to. Print it in PETG or ASA.

There’s also a variety of console trays to pick from. The author personally uses this center console tray with a J1772 slot, and this second one as the other console tray. If you’ve got a Model S or Model X instead, this console tray would work for you.

Tools & Etc.,

Not a Tesla App

One of the best tools for any owner with a hitch installed – a hitch tool. This tool makes it easy to open up the hitch cover. There are no recommendations on the filament here, but stronger is better.

Here’s another super tool if you don’t have one — a windshield washer fluid funnel. It can be difficult to fill up your washer fluid without spilling, so if you don’t already have a funnel, this could be a good option. You can print this in PLA and just leave it in the frunk, as even a little deformation won’t matter.

Not a Tesla App

Wheels

Not a Tesla App

If you have Tesla’s Aero covers but don’t use them year-round, this is a nice accessory to hang them on the wall. There are also other accessories to cover up the Aero center cap and lug nuts when you do use them. You can print the hangers in PLA, but you’ll absolutely want the center caps and lug nuts in ASA or ABS.

Fun Stuff

Not a Tesla App

Ok, now on to all the fun stuff. There are a ton of different Tesla models to print. There’s an RC Cybertruck (best in ABS) and a Cybertruck model kit card (PLA). If you’re up for something in between, you can check out this model kit instead, which bridges the gap.

There’s also wall art and a great Supercharger for your phone. You can print all these in anything you’d like.

There’s also a lot more available on Printables (or your site of choice) than the ones we’ve highlighted here. This is just a small tidbit of some of the cool and unique stuff that’s available.

If you have some other awesome ideas or have designed something yourself, let us know on social media.

Latest Tesla Update

Confirmed by Elon

Take a look at features that Elon Musk has said will be coming soon.

Tesla Videos

Latest Tesla Update

Confirmed by Elon

Take a look at features that Elon Musk has said will be coming soon.

Subscribe

Subscribe to our weekly newsletter