The feature is now possible thanks to what Wes Morrill, Cybertruck’s lead engineering, points out is a huge rewrite of Tesla’s Trip Planner, which not only makes it much more accurate but will now allow users to choose their arrival charge percentage.
More Accurate Trip Planner
When you navigate to a destination, your Tesla will automatically calculate when, where, and how much you need to charge. While the process seems straightforward, Tesla deserves a lot of credit for creating a simple user experience because a lot goes into accurately determining this information.
Tesla has to calculate many moving pieces in order to accurately predict when and where you should stop. First, it needs to consider your driving efficiency and wind direction, terrain elevation, traffic, vehicle speed, and ambient temperature. It also needs to predict the best Superchargers to stop at, taking into account congestion and charger speed.
This morning, in response to Dan Burkland, Wes shared that Tesla had significantly rewritten the backend portion of Trip Planner. These improvements, made by several engineers, were designed to improve Trip Planner’s accuracy and open the door to future features.
It sounds like these changes are mostly server-side, so thanks to their OTA connection, more accurate predictions should be available to all vehicles—no vehicle update is required.
Arrival State of Charge
Along with Tesla’s improvements to Trip Planner, Wes also stated that these improvements allow for a popular feature request — the ability to select your desired charge level at arrival.
Up until now, Tesla’s Trip Planner tried to get you to your destination as quickly as possible, which usually meant arriving with a low state of charge.
While this was fine if you have a charger at your destination, it’s not great if you don’t, or it could be even worse if there are no chargers nearby.
Max de Zegher said on X that he has heard the requests for a selectable arrival state of charge. Wes later clarified this by saying that these improvements to Tesla’s Trip Planner now allow for additional features to be added, such as “desired arrival charge.”
Actually trip planner got a huge rewrite on the back end. I had a great conversation with one of the engineers working on this over a morning run a few weeks back, it's pretty neat. The rewrite also unlocks additional features, like desired arrival charge.
Given that Max de Zegher’s comments came last night and Wes Morrill commented this morning, this feature request likely won’t arrive with the upcoming Holiday Update. Tesla actually hinted at such a feature being added in their last app update, so it does seem like they’ve already planned for it.
Although ‘Arrival State of Charge’ was on our wishlist for the Holiday Update, it looks like it may arrive soon after the holidays.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
Last night, Tesla released software update 2024.45.25.15, which includes FSD V12.6.1. This update adds support for all HW3 vehicles, including the Model 3 and Model Y. We’re excited to see the continued support for HW3 owners.
FSD V12.6.1
V12.6.1 is now going wide, according to Ashok Elluswamy, Tesla’s VP of AI. This update is going to the Model 3 and Model Y for the first time - as only the Model S and Model X were included in FSD V12.6.
V12.6 is a big step forward for HW3 - it includes End-to-End on Highway, Improved City Streets Behavior, and Smoother and More Accurate Tracking - all contributing towards a better, smoother, and more comfortable build of FSD. You can read our comparison between FSD V12.6 and V13.2.2 here.
In short, FSD V12.6 performs considerably closer to V13 than V12.5.4.2 - which is a massive improvement. It performs as well as the Cybertruck version of FSD V13, which is still missing a few features when compared to other HW4 vehicles, but it’s a great sign for HW3. A lot of the improvements can be pointed to in the improvements to lane selection and decision-making - the vehicle tends to hesitate far less on V12.6, meaning the ride is a lot smoother. Many early V12.6 testers mentioned that it felt more like V13-mini than anything else.
Legacy Model S & X
We haven’t seen this update hit any legacy Model S and Model X vehicles just yet. We’re not sure whether Ashok’s statement of “generally” applies here - but it should. If you do get the update, please let us know.
Legacy Model S and Model X vehicles are still on an older FSD build and potentially won’t see another FSD update for a little while longer. While they do have the same FSD hardware as other vehicles, there are enough hardware differences that require a build specifically for these vehicles.
FSD V12.6.1 is going out now to the redesigned Model S and X with HW3 and all Model 3 and Model Y vehicles with HW3. The initial wave went out last night, and we expect to see more later today or tomorrow. If this release ends up going “wide,” we should see much larger waves go out next week.
Tesla has issued a recall for some vehicles due to issues linked to a revision of the Hardware 4 (HW4) computer that was introduced this past November. This recall affects all vehicles with the revised hardware except for the Cybertruck, as it uses a slightly modified version of the HW4 system.
Many vehicle owners have reported a complete failure of their Autopilot computer, which not only leaves the vehicle without FSD and Autopilot but also disables many of the active safety features that make a Tesla what it is.
Let’s take a look at this recall - because the recall is partially physical and partially a software recall.
HW4 Failure
Tesla has identified the failure and flagged it to the U.S. NHTSA (but not Transport Canada or Euro NCAP at the time of publishing) as a recall.
Tesla mentions that the vehicle’s FSD computer circuit board may short circuit, resulting in the loss of the rearview camera image. The recall itself is focused on the rearview camera - as not having a functional rearview camera breaks a Federal Motor Vehicle Safety Standard. However, it does impact more than just the rearview camera.
As previously mentioned, users have experienced the full loss of Autopilot and FSD on these vehicles, as well as reduced traction control and removal of safety features such as automatic emergency braking, collision avoidance assist, and forward collision warnings.
While the vehicle remains driveable, it is not necessarily a good idea to drive the vehicle with many of these features, especially with the reduced traction control noted by many people. We’ve already noted that while Tesla has been sending tow trucks to pick up some vehicles, it is also prompting owners to drive the vehicle to their service center in some cases.
Remedy
Unlike most of Tesla’s recalls, this one isn’t entirely an OTA recall, owing to the fact that people have already experienced circuit board shorts and are already waiting for replacements.
The software portion of the recall has already been mostly completed for any vehicles with Tesla software update 2024.45.25.3 or greater. However, a significant portion of the tracked fleet remains on update 2024.44.25.2 (approximately 20%), so we recommend updating your HW4 vehicle whenever you receive the notification.
On the hardware side, Tesla is immediately identifying and replacing hardware that has had circuit board failure. Tesla is also reaching out to customers who have expressed intermittent issues with Autopilot features, active safety features, or vehicle cameras that don't display correctly. If you have experienced any of these issues in a late 2024 vehicle, we recommend submitting a service ticket with Tesla to ensure that your vehicle isn’t affected by this recall.
