Tesla software update 2024.44.3 has started rolling out to customers in larger waves recently and it brings several new features - including Actually Smart Summon to Europe and the Middle East, as well as improvements to Autopark. But that’s not all, it also adds a new Blind Spot Monitoring feature to the new Model 3, and potentially the Cybertruck, but that’s still to be determined.
We previously covered the Blind Spot Warning While Parked as part of our preview notes for update 2024.44, but now that it's going out to customers, it's time to see it in action.
If the vehicle’s door open button is pressed, and a vehicle or object is near or incoming, the vehicle’s Blind Spot Warning Light (2024 Model 3 and Cybertruck) will illuminate, an audible tone will ring and the door won’t open. A message will also be displayed on the center displaying, letting driver’s know why the door didn’t open.
Pressing the button a second time will allow you to override the warning and open the door normally, providing a way to get out in case you just parked close to a nearby vehicle or obstacle.
The object detection for this new feature includes cars, pedestrians, cyclists, and other objects - like things including traffic cones, bollards, strollers, and other large obstacles that FSD and vision-based Autopark detect during normal operation. Of note - this only works for the front two doors. Thanks to X user Max, who did some testing for us, It does not work for the rear passenger doors.
Optional Feature
The feature is optional - it’ll be enabled by default for safety, but if you need to enable or disable it, you can do so under Controls > Safety. For now, the feature is only available on the 2024 Model 3, but we expect it to roll out to the Cybertruck at least. However, there’s no reason why it can’t be added to other vehicles as well, minus the small red dot. We expect Tesla to eventually add this feature to all Tesla vehicles, but it’s currently not a part of update 2024.44.
Enhauto’s S3XY Buttons & Commander
If that’s not enough safety and vision for you, Enhauto, the makers of the popular S3XY Buttons and Commander recently put out a new software update for the 2024 Model 3, which makes some fantastic use of the ambient lighting.
With Enhauto’s solution, users are able to tie their ambient lights to Autopilot use, turn signals or even if a vehicle is their blind spot. Check out the video below for this awesome implementation, where the ambient lights turn red when another vehicle approaches.
Maybe Tesla will integrate something like this into a future update? We’ve been hoping for more customizability with their ambient lighting - it's an easy safety win and a demonstration of Tesla’s do-more-with-less attitude.
I look forward to @enhauto updates more than Tesla...
Ambient light effects....
I set default color to white. Blinks green on turn signals Turns blue on FSD activation Yellow if someone in blind spot Blinks red if turn signal on and blind spot activity detected.
The feature is now possible thanks to what Wes Morrill, Cybertruck’s lead engineering, points out is a huge rewrite of Tesla’s Trip Planner, which not only makes it much more accurate but will now allow users to choose their arrival charge percentage.
More Accurate Trip Planner
When you navigate to a destination, your Tesla will automatically calculate when, where, and how much you need to charge. While the process seems straightforward, Tesla deserves a lot of credit for creating a simple user experience because a lot goes into accurately determining this information.
Tesla has to calculate many moving pieces in order to accurately predict when and where you should stop. First, it needs to consider your driving efficiency and wind direction, terrain elevation, traffic, vehicle speed, and ambient temperature. It also needs to predict the best Superchargers to stop at, taking into account congestion and charger speed.
This morning, in response to Dan Burkland, Wes shared that Tesla had significantly rewritten the backend portion of Trip Planner. These improvements, made by several engineers, were designed to improve Trip Planner’s accuracy and open the door to future features.
It sounds like these changes are mostly server-side, so thanks to their OTA connection, more accurate predictions should be available to all vehicles—no vehicle update is required.
Arrival State of Charge
Along with Tesla’s improvements to Trip Planner, Wes also stated that these improvements allow for a popular feature request — the ability to select your desired charge level at arrival.
Up until now, Tesla’s Trip Planner tried to get you to your destination as quickly as possible, which usually meant arriving with a low state of charge.
While this was fine if you have a charger at your destination, it’s not great if you don’t, or it could be even worse if there are no chargers nearby.
Max de Zegher said on X that he has heard the requests for a selectable arrival state of charge. Wes later clarified this by saying that these improvements to Tesla’s Trip Planner now allow for additional features to be added, such as “desired arrival charge.”
Actually trip planner got a huge rewrite on the back end. I had a great conversation with one of the engineers working on this over a morning run a few weeks back, it's pretty neat. The rewrite also unlocks additional features, like desired arrival charge.
Given that Max de Zegher’s comments came last night and Wes Morrill commented this morning, this feature request likely won’t arrive with the upcoming Holiday Update. Tesla actually hinted at such a feature being added in their last app update, so it does seem like they’ve already planned for it.
Although ‘Arrival State of Charge’ was on our wishlist for the Holiday Update, it looks like it may arrive soon after the holidays.
As Tesla update 2024.44.3 continues to roll out, we’re seeing more features in this update. While the update doesn’t include many new feature, it either improves existing features or rolls out a feature to new regions. Actually Smart Summon is rolling out to Europe, although with more strict restrictions. AutoPark is also rolling out to the UK and several other countries for the first time, and we’re now seeing improvements to Autopark arriving in North America and Europe.
As Tesla’s 2024.44.3 update continues to roll out, more features in the update are being revealed. While this update doesn’t introduce many entirely new features, it does refine existing features or expand the reach of others.
Notably, Actually Smart Summon is now rolling out in Europe, albeit with stricter regulations. Vision-based AutoPark is debuting in the UK and several other countries, while North America and Europe are receiving updates that further improve Autopark’s functionality.
Improvements to Autopark
As part of the same update, Tesla is making a batch of improvements to Autopark in Europe and North America. In the release notes, Tesla states that Autopark is receiving performance and visualization improvements. Unfortunately, Tesla doesn’t go into more detail here, but it sounds like these improvements could be the faster and more accurate Autopark enhancements Ashok Elluswamy talked about earlier this year.
Those improvements are expected to make Autopark more reliable, let it pick spots faster, move faster into them, and also shift between forward and reverse faster. The improvements would also let the vehicle park in tighter spots than before, with more accurate vision.
We’ll have to wait and see how this improved Autopark compares to the current version.
Your vehicle's Autopark performance and visualizatons have been improved.
Autopark in the UK and Other Countries
Countries in Europe that previously didn’t have access to Vision-Based Autopark, including the UK, will now have access to the new Autopark for the first time with update 2024.44.3 and later. This includes countries such as the UK, Ireland and Malaysia.
While these countries are receiving Autopark, it’s not clear whether it includes the Autopark improvements that other regions are receiving. The release notes don’t include the Autopark Improvements section in these countries, but that could be due to Tesla simplifying the release notes for these countries that are receiving Autopark for the first time.
With Autopark finally introduced in these regions, it’ll be the first time vehicles without ultrasonic sensors are capable of Autopark. Vision-Based Autopark is far more reliable, faster, and easier to use in more situations than the older USS-based solution.
![Tesla Adds HEPA Filter to New Model 3, Will it Get Bioweapon Defense Mode? [Update: Tesla Edits Post]](https://www.notateslaapp.com/images/news/2023/new-model-3-hepa-filter_300w.jpg)
