The Cybertruck is having an eventful November. Just last week, we shared the news that Tesla isn’t offering their in-house wrap service for the Cybertruck anymore; the Foundation Series is now available in inventory in select US locations, Crossbars have arrived, and faster charging is around the corner. Now there’s even more to discuss about the stainless steel beast.
Projection Puddle Lights
Like the recently launched puddle lights for the Model 3 and Model Y, Tesla has introduced a set of add-on Projector Puddle Lights for the Cybertruck. These Cybertruck-specific ones go for $75 USD, or $105 CAD and are available in both the Canadian and US Tesla stores.
However, these don’t have the Tesla wordmark - instead, they feature the iconic Cybertruck symbol and, in our opinion, look even nicer. Here’s to hoping Tesla also introduces a set with the graffiti-style Cybertruck wordmark.
Powershare in Canada
While the Foundation Series Cybertruck has been getting delivered in Canada since November 7th, there was no news on Powershare being supported due to regulatory constraints. On the 20th, Foundation Series owners in Canada began to receive emails to get their Powershare installs started through Tesla’s official installer - Qmerit.
More to follow on pricing and the process as we receive our Canadian quote from Qmerit soon.
FSD in Canada
The Cybertruck Program Manager, Siddhant Awasthi, confirmed that with Powershare now becoming available, FSD for the Cybertruck in Canada will also become available soon. Canadian trucks shipped with a factory software build that didn’t include FSD, but did include TACC and stoplight/traffic control.
Early this morning Tesla began rolling out a new version of FSD 12.5.5.3 for the Cybertruck, which is update 2024.39.5. Will this be the version that rolls out in Canada?
Update: Yesterday, Tesla started rolling out FSD on the Cybertruck in Canada for the first time. The update being rolled out is update 2024.39.5, which not only features the latest FSD available on the Cybertruck, version 12.5.5.3, but it also includes all the features update 2024.38, which includes the huge Sentry Mode improvements that reduce power consumption by about 40%.
Following Integrated Flight Test 6 for SpaceX’s Starship, Elon Musk confirmed that uncrewed Starships are likely to begin making their way to Mars in about 2 years. You’re probably going to ask what’s going to be in those Starships - that’s what Brett Winston on X asked as well. Elon confirmed that Cybertrucks and Optimus robots will be among some of the first items landing on Mars.
That’s a ton of awesome news for Cybertruck, and there’s absolutely going to be more around the corner, especially as we await the big Tesla Holiday Update. While you wait, why not take a look at our Holiday Update Wishlists?
Ordering a New Tesla?
Consider using our referral code (nuno84363) to get up to $2,000 off your new Tesla and get 3 Months of FSD for free.
Tesla’s been on a roll with Supercharger improvements lately, from the 325kW charging update for the Cybertruck, to 500kW with V4 Superchargers coming next year. While those improvements have been limited to the Cybertruck, Tesla didn’t put all their focus on their new flagship vehicle, but looked at their more affordable vehicles as well.
LFP Battery Heating
Tesla’s Superchargers can now heat LFP Batteries - those that are in the Model 3 and Model Y Rear Wheel Drive variants. This applies to Long Range and Standard Range models, which saw a limited run. This is another update included as part of the 2024 Tesla Holiday Update - which really arrived with a lot of unannounced new features and capabilities.
The change is pretty interesting - Superchargers of the V3 and V4 variety can now pre-heat batteries for Model 3 and Model Y vehicles equipped with LFP battery packs. That means those vehicles are able to get back on the road faster when it's extremely cold. Of course, Tesla still advises you to precondition before you arrive, saving drivers time and money.
Max de Zegher, Tesla’s Director of Charging, also commented on the new feature. Essentially, Tesla is inducing an AC (alternating) ripple current through the battery to warm it up. Keep in mind that Superchargers are DC charging. That means it is possible to get a cold-soaked LFP vehicle on the road 4x faster than before, assuming that it didn’t precondition at all and that it is in the worst-case scenario (below 0ºF).
In essence, Tesla is using some engineering magic to turn the circuits inside the LFP battery into an electric heater - and powering that heater through the Supercharger. An AC ripple current is a small oscillation in the DC charging current that generates heat through electrical resistance, warming up the battery. Those ripples are a byproduct of converting AC to DC and back - so Tesla is using the onboard charger to induce those ripples to warm up the battery. Definitely an innovative technique that’s really only possible with the versatility of the NACS connector.
We’re hoping Tesla can implement this across their full lineup of vehicles, but we’ll have to wait and see how it is trialed across LFP vehicles first and if it is even possible on vehicles with 2170 or 4680 battery packs.
Tesla launched two FSD updates simultaneously on Saturday night, and what’s most interesting is that they arrived on the same software version. We’ll dig into that a little later, but for now, there’s good news for everyone. For Hardware 3 owners, FSD V12.6.1 is launching to all vehicles, including the Model 3 and Model Y. For AI4 owners, FSD V13.2.4 is launching, starting with the Cybertruck.
FSD V13.2.4
A new V13 build is now rolling out to the Cybertruck and is expected to arrive for the rest of the AI4 fleet soon. However, this build seems to be focused on bug fixes. There are no changes to the release notes for the Cybertruck with this release, and it’s unlikely to feature any changes when it arrives on other vehicles.
FSD V12.6.1 builds upon V12.6, which is the latest FSD version for HW3 vehicles. While FSD V12.6 was only released for the redesigned Model S and Model X with HW3, FSD V12.6.1 is adding support for the Model 3 and Model Y.
While this is only a bug-fix release for users coming from FSD V12.6, it includes massive improvements for anyone coming from an older FSD version. Two of the biggest changes are the new end-to-end highway stack that now utilizes FSD V12 for highway driving and a redesigned controller that allows FSD to drive “V13” smooth.
It also adds speed profiles, earlier lane changes, and more. You can read our in-depth look at all the changes in FSD V12.6.
Same Update, Multiple FSD Builds
What’s interesting about this software version is that it “includes" two FSD updates, V12.6.1 for HW3 and V13.2.4 for HW4 vehicles. While this is interesting, it’s less special when you understand what’s happening under the hood.
The vehicle’s firmware and Autopilot firmware are actually completely separate. While a vehicle downloading a firmware update may look like a singular process, it’s actually performing several functions during this period. First, it downloads the vehicle’s firmware. Upon unpacking the update, it’s instructed which Autopilot/FSD firmware should be downloaded.
While the FSD firmware is separate, the vehicle can’t download any FSD update. The FSD version is hard-coded in the vehicle’s firmware that was just downloaded. This helps Tesla keep the infotainment and Autopilot firmware tightly coupled, leading to fewer issues.
What we’re seeing here is that HW3 vehicles are being told to download one FSD version, while HW4 vehicles are being told to download a different version.
While this is the first time Tesla has had two FSD versions tied to the same vehicle software version, the process hasn’t actually changed, and what we’re seeing won’t lead to faster FSD updates or the ability to download FSD separately. What we’re seeing is the direct result of the divergence of HW3 and HW4.
While HW3/4 remained basically on the same FSD version until recently, it is now necessary to deploy different versions for the two platforms. We expect this to be the norm going forward, where HW3 will be on a much different version of FSD than HW4. While each update may not include two different FSD versions going forward, we may see it occasionally, depending on which features Autopilot is dependent on.
Thanks to Greentheonly for helping us understand what happened with this release and for the insight into Tesla’s processes.
