There’s been a spade of Cybertruck announcements that just came up all at once, so let’s see what the polygonal truck is up to in the month of November. We’ve got a variety of topics to cover, starting with some disappointing news about Tesla’s in-house wrapping services, which are being discontinued for the Cybertruck. But don’t worry — there’s plenty of good news to follow.
No More Tesla Wraps
Tesla no longer offers wraps for the Cybertruck as an option for US customers. Tesla began wrapping vehicles earlier this year but stopped offering wraps for the Cybertruck as of November 13th.
This comes after Tesla previously reduced the color options for Cybertruck wraps from seven to five. However, this isn’t too big of an issue—there are plenty of companies that specialize in vehicle wraps.
The reason Tesla stopped offering wrap services for the Cybertruck isn’t clear. Was there not enough demand? Did it take up too much time from technicians who are already stretched thin?
Given the long repair backlogs in the United States, it makes more sense to have service technicians focus on vehicle repairs rather than spending time wrapping cars.
Inventory Foundation Series
The Cybertruck Foundation Series is now available as an inventory vehicle in certain locations in the United States. That means you can pick up a Foundation-series truck with little to no delay.
Only a few trucks are currently in stock, but this will likely expand as Tesla continues to ramp production and begins to offer the non-Foundation Series trucks as inventory vehicles.
These inventory vehicles are only available in the United States. Canadian owners will still need to put down a deposit for a Foundation Series Cybertruck to get it soon.
Crossbars
Tesla has just announced it is offering a new set of crossbars for the Cybertruck. With a load rating of 200 lbs, it’s on par with roof racks for other trucks. These crossbars also come with mounting pads and quick releases. There are also slots for attaching ski racks, bike racks, or even cargo boxes, letting owners expand the truck's storage capacity.
Interestingly, the Foundation Series trucks can install the crossbars over the cabin or the truck bed, while the non-Foundation Series can only mount the crossbars over the truck bed. That isn’t the greatest news - because one of the best uses for these crossbars is protecting the cabin glass when you’ve got items like long wooden planks hanging over the roof of the truck. Maybe we’ll see more on this soon.
The mounting points for the Cybertruck's crossbars.
Not a Tesla App
Update: It turns out that you can, in fact, install the crossbars anywhere on a non-Foundation series vehicle. You’ll just have to pay for an additional roof applique, according to Wes Morril, Lead Engineer of the Cybertruck Program.
Faster Charging
Tesla announced updated versions of the V4 Supercharger, with a more powerful electrical cabinet that can charge the Cybertruck at up to 500kW. That’s an insanely fast speed—nearly 1,300 mi/hr of charging. This will come as part of a future update for the Cybertruck and as V4 Supercharger stations begin to be deployed.
That’ll make the Cybertruck the fastest-charging Tesla - even with its enormous battery.
Tesla’s been on a roll with Supercharger improvements lately, from the 325kW charging update for the Cybertruck, to 500kW with V4 Superchargers coming next year. While those improvements have been limited to the Cybertruck, Tesla didn’t put all their focus on their new flagship vehicle, but looked at their more affordable vehicles as well.
LFP Battery Heating
Tesla’s Superchargers can now heat LFP Batteries - those that are in the Model 3 and Model Y Rear Wheel Drive variants. This applies to Long Range and Standard Range models, which saw a limited run. This is another update included as part of the 2024 Tesla Holiday Update - which really arrived with a lot of unannounced new features and capabilities.
The change is pretty interesting - Superchargers of the V3 and V4 variety can now pre-heat batteries for Model 3 and Model Y vehicles equipped with LFP battery packs. That means those vehicles are able to get back on the road faster when it's extremely cold. Of course, Tesla still advises you to precondition before you arrive, saving drivers time and money.
Max de Zegher, Tesla’s Director of Charging, also commented on the new feature. Essentially, Tesla is inducing an AC (alternating) ripple current through the battery to warm it up. Keep in mind that Superchargers are DC charging. That means it is possible to get a cold-soaked LFP vehicle on the road 4x faster than before, assuming that it didn’t precondition at all and that it is in the worst-case scenario (below 0ºF).
In essence, Tesla is using some engineering magic to turn the circuits inside the LFP battery into an electric heater - and powering that heater through the Supercharger. An AC ripple current is a small oscillation in the DC charging current that generates heat through electrical resistance, warming up the battery. Those ripples are a byproduct of converting AC to DC and back - so Tesla is using the onboard charger to induce those ripples to warm up the battery. Definitely an innovative technique that’s really only possible with the versatility of the NACS connector.
We’re hoping Tesla can implement this across their full lineup of vehicles, but we’ll have to wait and see how it is trialed across LFP vehicles first and if it is even possible on vehicles with 2170 or 4680 battery packs.
Tesla launched two FSD updates simultaneously on Saturday night, and what’s most interesting is that they arrived on the same software version. We’ll dig into that a little later, but for now, there’s good news for everyone. For Hardware 3 owners, FSD V12.6.1 is launching to all vehicles, including the Model 3 and Model Y. For AI4 owners, FSD V13.2.4 is launching, starting with the Cybertruck.
FSD V13.2.4
A new V13 build is now rolling out to the Cybertruck and is expected to arrive for the rest of the AI4 fleet soon. However, this build seems to be focused on bug fixes. There are no changes to the release notes for the Cybertruck with this release, and it’s unlikely to feature any changes when it arrives on other vehicles.
FSD V12.6.1 builds upon V12.6, which is the latest FSD version for HW3 vehicles. While FSD V12.6 was only released for the redesigned Model S and Model X with HW3, FSD V12.6.1 is adding support for the Model 3 and Model Y.
While this is only a bug-fix release for users coming from FSD V12.6, it includes massive improvements for anyone coming from an older FSD version. Two of the biggest changes are the new end-to-end highway stack that now utilizes FSD V12 for highway driving and a redesigned controller that allows FSD to drive “V13” smooth.
It also adds speed profiles, earlier lane changes, and more. You can read our in-depth look at all the changes in FSD V12.6.
Same Update, Multiple FSD Builds
What’s interesting about this software version is that it “includes" two FSD updates, V12.6.1 for HW3 and V13.2.4 for HW4 vehicles. While this is interesting, it’s less special when you understand what’s happening under the hood.
The vehicle’s firmware and Autopilot firmware are actually completely separate. While a vehicle downloading a firmware update may look like a singular process, it’s actually performing several functions during this period. First, it downloads the vehicle’s firmware. Upon unpacking the update, it’s instructed which Autopilot/FSD firmware should be downloaded.
While the FSD firmware is separate, the vehicle can’t download any FSD update. The FSD version is hard-coded in the vehicle’s firmware that was just downloaded. This helps Tesla keep the infotainment and Autopilot firmware tightly coupled, leading to fewer issues.
What we’re seeing here is that HW3 vehicles are being told to download one FSD version, while HW4 vehicles are being told to download a different version.
While this is the first time Tesla has had two FSD versions tied to the same vehicle software version, the process hasn’t actually changed, and what we’re seeing won’t lead to faster FSD updates or the ability to download FSD separately. What we’re seeing is the direct result of the divergence of HW3 and HW4.
While HW3/4 remained basically on the same FSD version until recently, it is now necessary to deploy different versions for the two platforms. We expect this to be the norm going forward, where HW3 will be on a much different version of FSD than HW4. While each update may not include two different FSD versions going forward, we may see it occasionally, depending on which features Autopilot is dependent on.
Thanks to Greentheonly for helping us understand what happened with this release and for the insight into Tesla’s processes.
_300w.png)
