Tesla’s Cybercab / Robotaxi - Price, FSD Hardware, Release Date, Screen Size and More
October 10th was Tesla’s spectacular ‘We, Robot’ robotaxi event, and now we know a lot more about Tesla’s upcoming robotaxi – officially named the Cybercab – than ever before.
So, grab your Tesla-stamped BBQ burgers and put on your 12 gallon hat, we’re going to take a look at everything we know about Tesla’s Cybercab.
Exterior
The Cybercab showed up to ‘We, Robot’ with both a front and rear lightbar, similar to the Cybertruck. However, unlike the truck – it’s not stainless steel. Instead, the prototypes that were at the robotaxi event arrived with aluminum body panels painted silver.
While the exterior finish won’t be as tough-as-nails as the Cybertruck, the Cybercab is designed to be cheaply mass-produced, so this decision makes sense. While there was early talk about using a stainless steel “exoskeleton,” it appears Tesla decided that aluminum and steel body panels would be easier and/or cheaper to manufacture.
While many initial concepts thought the Cybercab may only include three wheels, it does indeed have four wheels like a normal car.
And of those four, only the front two did the steering – so no rear-wheel steering here. Speaking of the wheels, they were mostly covered up with a disc-shaped plate, making them extremely aerodynamic. Tesla also painted the sidewalls of the tires silver, leaving them looking super slim in comparison to the size of the wheel.
Looking at the whole vehicle, the Cybercab doesn’t have Tesla’s iconic glass roof – but a simpler metal roof. The windows are not frameless either – they are framed (metal around the glass opening), which makes them easier to maintain and produce. All these changes are clearly aimed at reducing the overall cost of the vehicle, fitting its robotic taxi role.
The one oddball in terms of price-to-function ratio is the butterfly doors. Cybercab’s butterfly doors are super impressive – and strike a pose just as iconically as the Model X. We’re interested to see what Tesla has planned for these automatic doors – as they may be difficult to maintain and service in colder climates given snow and ice build-up.
Interior
On the interior, the Cybercab comfortably seats two adults with large, padded seats. In these prototype vehicles, the seats are not ventilated, but they are heated. The seats themselves were fairly simple in comparison to Tesla’s other seat designs, even when compared to the simpler Mexican Model 3 with its fabric seats.
Tesla has made the overall interior design very simplistic and easy to clean. They showed off a new automatic vacuum and scrubbing unit that was cleaning the robotaxi’s seats and screens – so these seats are likely intended to take some punishment. And the screen will likely need to be cleaned often. There were no other major controls in the vehicle to clean – no steering wheel, no pedals.
However, the interior is classic Tesla—super spartan, stylish, and clean, with an extremely large 20.5” center display intended to display trip progress and entertainment. In comparison, the Cybertruck currently has the largest display in any Tesla, with an 18.5” screen. The Model 3 and Model Y use a 15” screen. Unsurprisingly, it looked like both video games and movies and TV shows would be available in the Cybercab.
Two drink holders are also located just in front and below the center armrest. Just under the drink holders (towards the passengers) are the buttons to open and close the doors. The doors normally close automatically when the passenger(s) buckle up, but they can also be closed manually.
As expected, the controls for the windows are on the doors, so nothing too special there. Tesla has only shown the white interior so far, with black trim throughout the interior, including the carpet floor and plastic headliner. We’re hoping that Tesla also introduces a black interior – even with how resilient Tesla’s whites are – a black interior is likely to better last through the day-to-day punishment a taxi goes through.
FSD Hardware/AI
At the event, Elon Musk confirmed that Cybercab would be shipping with an “upsized” Hardware 5/AI 5. It looks like AI5 has mostly the same camera layout as AI4—with two (+1 fake) cameras at the top of the windshield. The car also features a front bumper camera, the usual two B-pillar cameras, and one rear-facing camera.
Currently, the only vehicle with the same camera setup is the Cybertruck. We’ve heard rumors that the upcoming Model Y Juniper Refresh, as well as future Model S and Model X vehicles, will also have a front bumper camera.
Storage
The Cybercab's rear end has a fairly large amount of storage—the rear hatch opens upwards and reveals a sizeable cavity. From some rough estimates, it will be possible to comfortably throw 3-4 large suitcases back there, along with a few other items.
Internally, there’s less space, but as there is no center storage console, there is a large amount of legroom. If you potentially needed extra space, you could put a backpack on the floor of the Cybercab between your feet, and still have plenty of space to stretch.
Release Date
Elon acknowledged he’s been overly optimistic about timelines and relented that production for Cybercab should begin no later than 2027. However, he did mention 2026 as a likely start date.
Now that the Cybercab has been unveiled, we’ll likely start seeing design and build prototypes on the roads in Texas and California – where Tesla plans to start Unsupervised FSD – sometime in late 2026. More vehicles will show up in 2027.
Price
In a somewhat surprising move, Tesla announced that they’ll also sell the Cybercab to anyone who wants to buy it, whether it’s for personal use or to operate their own fleet of autonomous taxis. Tesla announced that they plan to sell the Cybercab for under $30,000 USD. Given the lack of steering wheel and pedals, we’re not sure whether the US Federal EV Rebate or the Canadian iZEV rebates would be applicable to these Cybercabs, but we’ll see how that pans out in the future. Both of these rebate programs are set to expire before the Cybercab hits the road.
Cybercab Hubs – Cleaning & Charging
Elon also confirmed that the Cybercab has inductive charging – a first for a fleet-scale EV. It seems that Cybercabs will likely belong to “hubs” where they can be charged and get cleaned. Whether these hubs are Tesla-owned facilities or consumer-owned is yet to be determined.
Tesla also showed off a very short clip of the Cybercab getting cleaned with robotic arms. The cost and complexity of this are likely to drive a model where Tesla provides the facilities for charging and cleaning while owners simply let their vehicles be charged or cleaned as required.
We’re excited to hear more details about how exactly Tesla intends to build out these potential hubs and more details about the upcoming Cybercab. Now that the event has passed, we should start to see a steady flow of new information as Elon or other Tesla executives share new details.
![Video Reveals the Cybertruck's Unique User Interface [Video]](https://www.notateslaapp.com/images/news/2023/cybertruck-ui-1_300w.jpg)
