Tesla has released vision Park Assist with Tesla update 2023.6.9
@EVBaymax & @ManZoneBeer
Tesla has unveiled the Vision Park Assist feature with its new software update, version 2023.6.9 for non-FSD Beta vehicles. This cutting-edge feature employs the car's cameras to measure distances to nearby objects, offering users valuable parking assistance.
When Tesla removed ultrasonic sensors (USS) from their vehicles six months ago, some owners expressed concerns regarding the loss of parking assistance. In response, Tesla embarked on the transition towards a vision-based solution, culminating in the introduction of Vision Park Assist.
Accuracy of Park Assist
Twitter user @EVBaymax couldn’t wait till morning to test out the new Vision Park Assist feature. Equipped with his Model 3 and a measuring tape, @EVBaymax put the new technology to the test and shared it all on Twitter, providing some valuable insight into its performance. In one video, he said, “super-impressive what Tesla has been able to do. This is… Wow! I’m impressed.” @EVBaymax was showing the car within an inch or two of what the reading said inside the car.
However, he did spot something less impressive. When shifting into drive or reverse after being parked for a few minutes, a message pops up that says: Park Assist is Loading. That load took 6-8 seconds as the system recalls what was around it before it was parked. The time is quite a lag compared to the USS-enabled systems. @EVBaymax is hopeful this is addressed. However, the vehicle did eventually load the data it had before it was turned off, showing the same distance to the curb that was in front of it, even though the curb was out of view of the cameras.
Several online videos show a significant difference in readings between USS and Vision. USS mostly displays smooth readings with straight edges, but vision does not display many straight lines. When backing up to a curb, @EVBaymax notes that the line representing the curb is “squiggly and is moving.”
Availability
Although Park Assist was initially included in FSD Beta 11.3.2 and limited to North American markets, Tesla is rolling out Park Assist to additional markets with update 2023.6.9.
Currently, the Vision Park Assist feature is compatible with Model 3 and Model Y vehicles. Users also have the option to turn off Park Assist if they prefer, just like owners with USS. This innovative technology offers 360-degree detection, instead of just front and rear, as highlighted in our previous article.
Park Assist Detecting a Curb
One of the advantages of vision-based Park Assist is the ability to detect objects on the side of the vehicle. @EVBaymax does a great job illustrating that in this video below.
At this time, it appears that vehicles with ultrasonic sensors still offer a higher level of accuracy, however that could depend on the height of the object and the type of object itself.
Vision Park Assist does not currently apply to vehicles with ultrasonic sensors. However, since Vision Park Assist does provide some advantages over its hardware-based version, it'll be interesting to see if Tesla incorporates it into all vehicles in the future as the feature matures.
As more Tesla owners install and utilize Vision Park Assist, the feature is expected to improve. The company will use the collected data to enhance distance estimates, aiming for accuracy on par with sensor-based systems.
Tesla's Vision Park Assist offers visual and auditory alerts for objects in the vehicle's surroundings, utilizing the occupancy network to generate high-definition object outlines. However, it is essential to remember that this feature should be treated as guidance, not as a substitute for an attentive driver.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
Tesla’s Vice President of Vehicle Engineering, Lars Moravy, recently took to X and opened the floor for user input. There, he asked the community for features and improvements they’d like to see to make Teslas better heading into 2026.
This post generated thousands of suggestions - and we recapped the best of them. There were also a few that Lars responded to, giving owners hope for some much-requested future changes, so let’s take a look at what may be coming
Lumbar Profile Support
Today, lumbar support is one of the few items that is not saved in the Tesla profile. That means if you have multiple drivers who use the same vehicle, you’re often left adjusting this setting manually, as it retains the setting that was last used. One community member suggested saving your lumbar setting to your profile just like Tesla does for other seat settings.
Lars said making this change seems doable, but it’ll take some engineering magic. The lumbar support isn’t tied to an absolute sensor like the other seat settings. This suggests that Tesla does not have an exact value to save, as it does with other seat functions, but Lars believes Tesla can find a way to save lumbar preferences. Tesla could potentially time how long the motor runs to get to the user’s lumbar setting and save this value.
With that said, it seems the vehicle engineering team may take a look at this one, and we may see it included in a future update.
Model 3 Signal Stalk Retrofit
The move away from traditional stalks in favor of the steering wheel buttons on the Refreshed Model 3 has been a point of debate. While the author is squarely in the camp of steering wheel buttons (at least with the Cybertruck), many dissent and say that the buttons on the Refreshed 3 aren’t as satisfying or easy to use.
Many other drivers also prefer the tactile feel and muscle memory of a physical stalk for signaling. Tesla appears to favor stalks, as they retained the turn signal stalk with the new Model Y. There are also rumors that Tesla is going to reintroduce the turn signal stalk to the Model 3.
If Tesla adds stalks back to the new Model 3, current 2024+ Model 3 owners are still left without stalks. However, a user suggested adding stalks as a retrofit option. Lars said that he would try to consider a retrofitted signal stalk for the Refreshed Model 3, similar to the simplified version in the Refreshed Model Y.
While less definitive than the lumbar support response, it appears that Tesla may at least consider offering a stalk retrofit for the new Model 3. If you’re a lover of signal stalks and can’t wait for Tesla to get an official one - we recommend the Enhauto S3XY Stalks, which are customizable and feel very close to Tesla’s original fit and finish.
With that said, it’s nice to see Tesla incorporating more community feedback into its vehicle design these days. Perhaps one day, they’ll address the infamous auto wipers. They have gotten better, but they’re still not as reliable as what’s available in most other vehicles. With that said, we look forward to the changes that will emerge from these recent conversations.
Sometimes, even with Tesla’s intensive bug-testing regime, bugs manage to make it out into the wild. In this particular case, a European user (@darkwaffle48484 on X) noticed that their 2024 Model 3 was using up more battery than normal while parked. Normally, they noted that the vehicle would lose about 1-2% per week; however, recently, they noticed much larger drops of 3-4% per night.
They monitored their Tesla widget and noticed the car wasn’t entering deep sleep. The widget consistently showed a recent connection time—usually within the past 45 minutes.
Fix Inbound
After discussing the issue with other Tesla owners and realizing it was somewhat widespread, they contacted Tesla Service. The service team confirmed that it was a firmware bug affecting the Telematics Control Unit (TCU), which prevented the vehicle from entering deep sleep mode.
The TCU is essentially the communications hub of your Tesla - and is mounted on the ceiling of newer vehicles such as the Model 3 and the new Model Y. It enables cellular and location services (via GPS) and also handles Wi-Fi and Bluetooth services. Tesla Service stated that this bug is planned to be fixed in update 2025.14.6, although the exact version number could change. However, they confirmed that they are aware of the issue and it is being addressed.
@darkwaffle48484
When the user reached out to Tesla Service, Tesla Service responded with the following (translated from Dutch):
“It has been confirmed that this is a firmware bug. The fix is in one of the next updates. Currently, it is planned for 2025.14.6 (subject to change). Do you have any more questions?”
Potentially Region-Specific
This bug could potentially be region-specific. TCUs often require specific hardware components, such as modems, as well as specific firmware versions that support different regions and cellular providers. These enable Tesla to comply with local cellular standards and regulations and ensure that your vehicle can connect to the networks available in that particular region.
At this point, it’s not clear when the fix will roll out, but given that update 2025.14.1 has practically stopped rolling out, Tesla may be waiting to resume the rollout with update 2025.14.3 or this 2025.14.6 version.
If you’ve noticed this issue and are in a non-European nation, let us know.
![Tesla's 2025 Q1 Earnings Call: How to Listen [Listen to Replay]](https://www.notateslaapp.com/img/containers/article_images/multiple-models/group_81.jpg/b2695a53b51e4c7927802deba2534b09/group_81.jpg)
