Will Tesla add a bird's eye view feature to newer vehicles?
@zzapcars
Tesla’s forthcoming hardware 4.0 computer reveals that Tesla will be able to connect up 12 cameras with its new FSD hardware suite, up from the current nine it uses today.
Earlier this week, Tesla owner and hacker Greentheonly leaked information and pictures of Tesla’s anticipated hardware 4.0. Green confirmed some big and subtle improvements to the hardware.
12 Cameras in Hardware 4
The new hardware's main board will accept up to 12 cameras, with one of them labeled as a spare. Tesla currently uses nine cameras in its current hardware and is expected to reduce the front-facing cameras by one. Based on this information and the labels on the camera connectors, it appears that Tesla will include three additional cameras with FSD hardware 4.0.
When Greentheonly revealed these hardware 4 details, Twitter user StayLameBro1 inquired about where the new cameras will be placed around the vehicle. “There are seemingly 3 bumper cameras,” Green responds. “One up front the other two are left and right so in the corners somewhere.”
Green adds that the addition of bumper cameras and HD radar will remove blind spots. This is a big deal alone. Lastly, Green added that these additional cameras could allow Tesla to incorporate a real bird’s eye view into its vehicles, a feature many Tesla owners have been requesting.
There's currently a large blind spot in front of the vehicle
Munro
Bird’s Eye View
Bird's eye view is a feature that many other automakers have had for a while now, including Toyota, Honda, BMW, and Lucid. It allows for drivers to see a top-down view of their vehicle and surroundings, increasing safety and spatial awareness.
Last fall, Tesla announced they’re transitioning their fleet to their own Tesla Vision. The company added that vehicles built in October 2022 and beyond would no longer include ultrasonic sensors (USS). This sent confusion around the Tesla community given the blind spots, but hardware 4 will seemingly address these concerns.
The removal of the USS saves Tesla approximately $114 per vehicle. This is in line with “Project Highland,” a cost-cutting project for the upcoming revamped Model 3.
Tesla CEO Elon Musk told investors that upgrading hardware 3 to hardware 4 is difficult and expensive.
“The cost and difficulty of retrofitting hardware 3 with hardware 4 is quite significant,” Musk said. “So, it would not be, I think, economically feasible to do so.”
After the leak of hardware 4, we now begin to understand Musk's statement. We're not only talking about a new computer with hardware 4, but higher-resolution cameras, additional cameras, possibly a new bumper design and an HD radar unit.
Musk has also reiterated that hardware 3 will be capable of driving safer than a human, however, it's not clear under which constraints that would be, such as specific roads and weather conditions, or whether a human driver would always be required to be attentive.
Update: We have now confirmed that FSD Hardware 4.0 will not include additional cameras in the bumper or elsewhere, which means that the vehicle will still have a blind spot. However, we have been told that the 'bumper' camera connectors on HW4.0 are for future expansion, but will not be used initially.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
In last year’s holiday update, Tesla introduced the much-needed Dashcam Viewer in the Tesla app. The feature allows owners to view Dashcam and Sentry Mode footage directly from the Tesla app, eliminating the need to review videos in your vehicle. Unfortunately, the feature was limited to iPhone users, but Tesla is now changing that.
With Tesla app update 4.43.5, Tesla is officially launching the Dashcam Viewer on Android devices.
Dashcam Viewer
The Dashcam Viewer makes it easy to access and manage your car’s Dashcam and Sentry Mode videos. Accessing videos on your phone is faster and more convenient, but it does come with a few requirements.
The Dashcam Viewer in the Tesla app allows you to view, delete, or save video clips right from your device. This should result in higher quality content being shared online and fewer videos of owners recording their Tesla’s screens with their phones.
How It Works
Dashcam footage remains stored locally on your vehicle’s connected USB drive, so Tesla isn’t streaming videos to your phone from the cloud. Instead, the videos are streamed directly from your vehicle to your phone—similar to how Actually Smart Summon delivers a live feed to your phone.
Because of this, your vehicle must be connected to cellular data or Wi-Fi for the Dashcam Viewer to work. Unfortunately, this may limit access for owners who park in underground or large parking garages where connectivity is poor.
How to Access the Dashcam Viewer
To view Dashcam and Sentry Mode footage in the Tesla app:
Navigate to Security & Drivers > Dashcam Viewer.
Wait a few moments for your phone to connect to the vehicle.
From there, you’ll be able to view, save, or delete clips right from your device.
Requirements
To use Tesla’s Dashcam Viewer, you’ll need a vehicle with MCU 2 (Intel) or higher. All models are supported except for the legacy Model S and Model X (2020 and older). However, we expect support to be added in the near future.
The legacy Model S and Model X are expected to receive support for Actually Smart Summon, which requires the ability for those vehicles to stream video to the Tesla app — the same capability the Dashcam Viewer needs. Once Actually Smart Summon is added to the legacy Model S/X, we expect those vehicles to also receive the Dashcam Viewer at the same time or shortly afterward.
Tesla has imposed some viewing limits to prevent high data usage. The viewing limits apply to streaming video from the Dashcam Viewer or viewing live video from the vehicle’s cameras. Tesla will limit video streaming from the vehicle to 15 minutes or 1 hour, depending on your region.
Android Support
Tesla typically releases support for newer features to iPhone users since they make up the majority of users. Recently, Tesla has added more features to Android. In January, Tesla added support for ultra-wideband to Android, which added support for the improved phone key and the hands-free trunk and frunk feature.
Did you know the Cybertruck’s air suspension automatically levels the truck, even while it’s asleep? This is a great feature, especially for camping or off-road adventures. However, it can be an issue when lifting a wheel to change a tire.
Fortunately, there’s a solution: Jack Mode.
Jack Mode
Jack Mode is made for jacking up the truck and prevents the Cybertruck from self-leveling.
To enable Jack Mode, you’ll first need to set the Ride Height to Medium from Controls > Dynamics > Ride Height. You can also set it from the Tesla app by navigating to the Controls section and sliding up until you see Ride Height. This will give you enough clearance for most jacks to get under the truck and lift it.
You can also activate Jack Mode in Low or High, but Tesla recommends a Medium ride height for best control of the vehicle and sufficient tire clearance to safely remove and reinstall the tire. However, once the vehicle is in Jack Mode, the Ride Height cannot be changed.
Next up, go to Controls > Service > Jack Mode to enable Jack Mode. The vehicle will warn you that Jack Mode is enabled and can either be disabled by pressing the button again or by putting the vehicle into drive.
For the duration that Jack Mode is active, it is safe to lift your Cybertruck, even on one side only. It will not self-level for the duration that Jack Mode is enabled.
Automatic Jack Mode
Jack Mode can also activate automatically to protect the suspension from potential damage. For example, if the vehicle’s bumper is resting on a curb, Jack Mode may engage on its own.
Once the obstacle is cleared, or if you shift into Drive or Reverse, Jack Mode will automatically be disabled.
![Video Reveals the Cybertruck's Unique User Interface [Video]](https://www.notateslaapp.com/images/news/2023/cybertruck-ui-1_300w.jpg)
